|
Download BulkGas 1500 Brochure 
The BulkGas™ 1500 Gas Delivery System is representative of SDC’s continuous drive and commitment to providing the industry’s safest and most reliable gas equipment available.
Mass customization and modular design concepts of the gas panels, controls architecture and cabinet enclosure have been combined to widen the product configuration spectrum and greatly increase user flexibility.
From the Fab to the Lab to the University, SDC sets ts itself apart as the clear choice for value in today’s budget conscious environment.
Standard Configurations:
- 2-Source
-2-Source, auto-switchover
-2-Source, auto-switchover with purge
- Independent out or auto swithover
Standard Controls / Features:
- PLC control of all critical functions
- Bright 10.4” color touch screen interface
- Proven auto-sequenced routines for all aspects of operation & maintenance
- User settable limits for all process and alarm parameters
- Exhaust pressure monitor
- On-screen warning, alarms, prompting and instructions
- SCADA compatable utilizing modbus open protocol
- Emergency Off [EMO]
- EMO & EGO inputs
- Alarm outputs
- Multi-level password protection
- Diagnostics screen
- Valve cycle count screen
- Z-Purge ready for CLASS I DIV II
Process Panel Features:
- Ultra-High-Purity [UHP] 316L or VAR construction
- Surface finish of 10Ra avg. or better
- UHP diaphragm valves
- Application specific regulator
- Precision pressure transducers
- Vacuum assisted purge
- UHP orbitally welded with strategic VCR® breaks
- Helium leak tested to 1 x 10-9 atm*cc/s
- CLASS 100 / CLASS 10 clean room assembled
Codes and Standards Referenced:
- SEMI® S2
- CE® mark
- ASME Section IX
- Factory Mutual®
- ASMNFPA® 79, 496, 70 [NEC]
- UL®
EXHAUST SPECIFICATIONS/REQUIREMENTS |
| CDA |
adjustable to 90 psig
|
1 slm max. |
| Purge N2 |
adjustable to 85 psig |
85 slm max. |
| Venturi N2 |
adjustable to 60 psig |
30 slm max. |
| Process Vent |
>1.0" WC |
100 slm |
| Power |
110V, 3A |
N/A |
| Sprinkler |
30 psig |
31 gpm |
| Exhaust |
>0.20 H2O |
300 scfm |
Please note that manual and/or semi-automated systems like the BulkGas™ are not recommend for use in ALL applications. SDC recommends that FULLY AUTOMATED SYSTEMS be used for toxics, corrosives, pyrophorics and other highly hazardous gases/liquefied gases.
Please contact us for further details. |